Cover (50 mm) in CNS 18/10, sound-deadened underlay, bevelled on all sides, with beaded edge, drip channel with drain and removable drip trays. 1 seamlessly welded-in bowl including drain connection with siphon and 1 1/4'' standpipe with valve seat. Refrigerated body foamed in one piece under high pressure, stainless steel inside and on the operating side outside, rear and sides in galvanised sheet steel. Installation compartment in stainless steel. Centrally cooled forced-air cooling with specially coated central evaporator, automatic defrost, condensate drain and electronic control with digital display. Installation compartment panel removable without tools. Hinged doors and drawer fronts each foamed in one piece under high pressure, with integrated handle rail and easily replaceable magnetic seal. Drawers with stainless steel telescopic runners, usable height 344 mm each. Per hinged door 1 tilt-proof height-adjustable pair of U-shaped support rails and 1 Rilsan-coated support grid, per drawer 2 drawer divider bars as accessories. 2 plinth profiles 40 mm high, each mounted lengthwise at the front and rear. Delivered without dispensing tower, mixer tap, drilled holes and solenoid valve. Glass rinser and mixer tap available at extra cost. Temperature range +2 / +12 °C. Connected load 40 W / 230 V / 50 Hz. Cooling capacity 300 W -10 °C VT / +32 °C UT. Dimensions unpacked (LxDxH) 1550 x 700 x 980 mm